Struct matrix_sdk_base::ruma::OwnedDeviceId

pub struct OwnedDeviceId { /* private fields */ }

Owned variant of DeviceId

The wrapper type for this type is variable, by default it’ll use Box, but you can change that by setting “--cfg=ruma_identifiers_storage=...” using RUSTFLAGS or .cargo/config.toml (under [build] -> rustflags = ["..."]) to the following;

• ruma_identifiers_storage="Arc" to use Arc as a wrapper type.

Methods from Deref<Target = DeviceId>

pub fn as_str(&self) -> &str

Creates a string slice from this DeviceId.

pub fn as_bytes(&self) -> &[u8]

Creates a byte slice from this DeviceId.

Trait Implementations

impl AsRef<[u8]> for OwnedDeviceId

fn as_ref(&self) -> &[u8]

Converts this type into a shared reference of the (usually inferred) input type.

impl AsRef<DeviceId> for OwnedDeviceId

fn as_ref(&self) -> &DeviceId

Converts this type into a shared reference of the (usually inferred) input type.

impl AsRef<str> for OwnedDeviceId

fn as_ref(&self) -> &str

Converts this type into a shared reference of the (usually inferred) input type.

impl Borrow<DeviceId> for OwnedDeviceId

fn borrow(&self) -> &DeviceId

Immutably borrows from an owned value.

impl Clone for OwnedDeviceId

fn clone(&self) -> OwnedDeviceId

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for OwnedDeviceId

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl Deref for OwnedDeviceId

type Target = DeviceId

The resulting type after dereferencing.

fn deref(&self) -> &<OwnedDeviceId as Deref>::Target

Dereferences the value.

impl<'de> Deserialize<'de> for OwnedDeviceId

fn deserialize<D>( deserializer: D, ) -> Result<OwnedDeviceId, <D as Deserializer<'de>>::Error>

where D: Deserializer<'de>,

Deserialize this value from the given Serde deserializer.

impl Display for OwnedDeviceId

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl From<&DeviceId> for OwnedDeviceId

fn from(id: &DeviceId) -> OwnedDeviceId

Converts to this type from the input type.

impl From<&str> for OwnedDeviceId

fn from(s: &str) -> OwnedDeviceId

Converts to this type from the input type.

impl From<Arc<DeviceId>> for OwnedDeviceId

fn from(a: Arc<DeviceId>) -> OwnedDeviceId

Converts to this type from the input type.

impl From<Box<DeviceId>> for OwnedDeviceId

fn from(b: Box<DeviceId>) -> OwnedDeviceId

Converts to this type from the input type.

impl From<Box<str>> for OwnedDeviceId

fn from(s: Box<str>) -> OwnedDeviceId

Converts to this type from the input type.

impl From<OwnedDeviceId> for Arc<DeviceId>

fn from(a: OwnedDeviceId) -> Arc<DeviceId>

Converts to this type from the input type.

impl From<OwnedDeviceId> for Box<DeviceId>

fn from(a: OwnedDeviceId) -> Box<DeviceId>

Converts to this type from the input type.

impl From<OwnedDeviceId> for DeviceIdOrAllDevices

fn from(d: OwnedDeviceId) -> DeviceIdOrAllDevices

Converts to this type from the input type.

impl From<OwnedDeviceId> for OwnedBase64PublicKeyOrDeviceId

fn from(value: OwnedDeviceId) -> OwnedBase64PublicKeyOrDeviceId

Converts to this type from the input type.

impl From<OwnedDeviceId> for String

fn from(id: OwnedDeviceId) -> String

Converts to this type from the input type.

impl From<String> for OwnedDeviceId

fn from(s: String) -> OwnedDeviceId

Converts to this type from the input type.

impl Hash for OwnedDeviceId

fn hash<H>(&self, state: &mut H)

where H: Hasher,

Feeds this value into the given Hasher.

fn hash_slice<H>(data: &[Self], state: &mut H)

where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher.

impl KeyName for OwnedDeviceId

fn validate(_s: &str) -> Result<(), Error>

Validate the given string for this name.

impl Ord for OwnedDeviceId

fn cmp(&self, other: &OwnedDeviceId) -> Ordering

This method returns an Ordering between self and other.

fn max(self, other: Self) -> Self

where Self: Sized,

Compares and returns the maximum of two values.

fn min(self, other: Self) -> Self

where Self: Sized,

Compares and returns the minimum of two values.

fn clamp(self, min: Self, max: Self) -> Self

where Self: Sized + PartialOrd,

Restrict a value to a certain interval.

impl PartialEq<&DeviceId> for OwnedDeviceId

fn eq(&self, other: &&DeviceId) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq<&str> for OwnedDeviceId

fn eq(&self, other: &&str) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq<Arc<DeviceId>> for OwnedDeviceId

fn eq(&self, other: &Arc<DeviceId>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq<Box<DeviceId>> for OwnedDeviceId

fn eq(&self, other: &Box<DeviceId>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq<DeviceId> for OwnedDeviceId

fn eq(&self, other: &DeviceId) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq<OwnedDeviceId> for &DeviceId

fn eq(&self, other: &OwnedDeviceId) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq<OwnedDeviceId> for &str

fn eq(&self, other: &OwnedDeviceId) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq<OwnedDeviceId> for DeviceId

fn eq(&self, other: &OwnedDeviceId) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq<OwnedDeviceId> for String

fn eq(&self, other: &OwnedDeviceId) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq<OwnedDeviceId> for str

fn eq(&self, other: &OwnedDeviceId) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq<String> for OwnedDeviceId

fn eq(&self, other: &String) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq<str> for OwnedDeviceId

fn eq(&self, other: &str) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq for OwnedDeviceId

fn eq(&self, other: &OwnedDeviceId) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialOrd for OwnedDeviceId

fn partial_cmp(&self, other: &OwnedDeviceId) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl Serialize for OwnedDeviceId

fn serialize<S>( &self, serializer: S, ) -> Result<<S as Serializer>::Ok, <S as Serializer>::Error>

where S: Serializer,

Serialize this value into the given Serde serializer.

impl Eq for OwnedDeviceId