Struct mas_oidc_client::jose::claims::Timestamp

pub struct Timestamp(/* private fields */);

Methods from Deref<Target = DateTime<Utc>>§

source

pub fn date(&self) -> Date<Tz>

👎Deprecated since 0.4.23: Use date_naive() instead

Retrieves the date component with an associated timezone.

Unless you are immediately planning on turning this into a DateTime with the same timezone you should use the date_naive method.

NaiveDate is a more well-defined type, and has more traits implemented on it, so should be preferred to Date any time you truly want to operate on dates.

§Panics

DateTime internally stores the date and time in UTC with a NaiveDateTime. This method will panic if the offset from UTC would push the local date outside of the representable range of a Date.

source

pub fn date_naive(&self) -> NaiveDate

Retrieves the date component.

§Panics

DateTime internally stores the date and time in UTC with a NaiveDateTime. This method will panic if the offset from UTC would push the local date outside of the representable range of a NaiveDate.

§Example
use chrono::prelude::*;

let date: DateTime<Utc> = Utc.with_ymd_and_hms(2020, 1, 1, 0, 0, 0).unwrap();
let other: DateTime<FixedOffset> =
    FixedOffset::east_opt(23).unwrap().with_ymd_and_hms(2020, 1, 1, 0, 0, 0).unwrap();
assert_eq!(date.date_naive(), other.date_naive());
source

pub fn time(&self) -> NaiveTime

Retrieves the time component.

source

pub fn timestamp(&self) -> i64

Returns the number of non-leap seconds since January 1, 1970 0:00:00 UTC (aka “UNIX timestamp”).

The reverse operation of creating a DateTime from a timestamp can be performed using from_timestamp or TimeZone::timestamp_opt.

use chrono::{DateTime, TimeZone, Utc};

let dt: DateTime<Utc> = Utc.with_ymd_and_hms(2015, 5, 15, 0, 0, 0).unwrap();
assert_eq!(dt.timestamp(), 1431648000);

assert_eq!(DateTime::from_timestamp(dt.timestamp(), dt.timestamp_subsec_nanos()).unwrap(), dt);
source

pub fn timestamp_millis(&self) -> i64

Returns the number of non-leap-milliseconds since January 1, 1970 UTC.

§Example
use chrono::{NaiveDate, Utc};

let dt = NaiveDate::from_ymd_opt(1970, 1, 1)
    .unwrap()
    .and_hms_milli_opt(0, 0, 1, 444)
    .unwrap()
    .and_local_timezone(Utc)
    .unwrap();
assert_eq!(dt.timestamp_millis(), 1_444);

let dt = NaiveDate::from_ymd_opt(2001, 9, 9)
    .unwrap()
    .and_hms_milli_opt(1, 46, 40, 555)
    .unwrap()
    .and_local_timezone(Utc)
    .unwrap();
assert_eq!(dt.timestamp_millis(), 1_000_000_000_555);
source

pub fn timestamp_micros(&self) -> i64

Returns the number of non-leap-microseconds since January 1, 1970 UTC.

§Example
use chrono::{NaiveDate, Utc};

let dt = NaiveDate::from_ymd_opt(1970, 1, 1)
    .unwrap()
    .and_hms_micro_opt(0, 0, 1, 444)
    .unwrap()
    .and_local_timezone(Utc)
    .unwrap();
assert_eq!(dt.timestamp_micros(), 1_000_444);

let dt = NaiveDate::from_ymd_opt(2001, 9, 9)
    .unwrap()
    .and_hms_micro_opt(1, 46, 40, 555)
    .unwrap()
    .and_local_timezone(Utc)
    .unwrap();
assert_eq!(dt.timestamp_micros(), 1_000_000_000_000_555);
source

pub fn timestamp_nanos(&self) -> i64

👎Deprecated since 0.4.31: use timestamp_nanos_opt() instead

Returns the number of non-leap-nanoseconds since January 1, 1970 UTC.

§Panics

An i64 with nanosecond precision can span a range of ~584 years. This function panics on an out of range DateTime.

The dates that can be represented as nanoseconds are between 1677-09-21T00:12:43.145224192 and 2262-04-11T23:47:16.854775807.

source

pub fn timestamp_nanos_opt(&self) -> Option<i64>

Returns the number of non-leap-nanoseconds since January 1, 1970 UTC.

§Errors

An i64 with nanosecond precision can span a range of ~584 years. This function returns None on an out of range DateTime.

The dates that can be represented as nanoseconds are between 1677-09-21T00:12:43.145224192 and 2262-04-11T23:47:16.854775807.

§Example
use chrono::{NaiveDate, Utc};

let dt = NaiveDate::from_ymd_opt(1970, 1, 1)
    .unwrap()
    .and_hms_nano_opt(0, 0, 1, 444)
    .unwrap()
    .and_local_timezone(Utc)
    .unwrap();
assert_eq!(dt.timestamp_nanos_opt(), Some(1_000_000_444));

let dt = NaiveDate::from_ymd_opt(2001, 9, 9)
    .unwrap()
    .and_hms_nano_opt(1, 46, 40, 555)
    .unwrap()
    .and_local_timezone(Utc)
    .unwrap();
assert_eq!(dt.timestamp_nanos_opt(), Some(1_000_000_000_000_000_555));

let dt = NaiveDate::from_ymd_opt(1677, 9, 21)
    .unwrap()
    .and_hms_nano_opt(0, 12, 43, 145_224_192)
    .unwrap()
    .and_local_timezone(Utc)
    .unwrap();
assert_eq!(dt.timestamp_nanos_opt(), Some(-9_223_372_036_854_775_808));

let dt = NaiveDate::from_ymd_opt(2262, 4, 11)
    .unwrap()
    .and_hms_nano_opt(23, 47, 16, 854_775_807)
    .unwrap()
    .and_local_timezone(Utc)
    .unwrap();
assert_eq!(dt.timestamp_nanos_opt(), Some(9_223_372_036_854_775_807));

let dt = NaiveDate::from_ymd_opt(1677, 9, 21)
    .unwrap()
    .and_hms_nano_opt(0, 12, 43, 145_224_191)
    .unwrap()
    .and_local_timezone(Utc)
    .unwrap();
assert_eq!(dt.timestamp_nanos_opt(), None);

let dt = NaiveDate::from_ymd_opt(2262, 4, 11)
    .unwrap()
    .and_hms_nano_opt(23, 47, 16, 854_775_808)
    .unwrap()
    .and_local_timezone(Utc)
    .unwrap();
assert_eq!(dt.timestamp_nanos_opt(), None);
source

pub fn timestamp_subsec_millis(&self) -> u32

Returns the number of milliseconds since the last second boundary.

In event of a leap second this may exceed 999.

source

pub fn timestamp_subsec_micros(&self) -> u32

Returns the number of microseconds since the last second boundary.

In event of a leap second this may exceed 999,999.

source

pub fn timestamp_subsec_nanos(&self) -> u32

Returns the number of nanoseconds since the last second boundary

In event of a leap second this may exceed 999,999,999.

source

pub fn offset(&self) -> &<Tz as TimeZone>::Offset

Retrieves an associated offset from UTC.

source

pub fn timezone(&self) -> Tz

Retrieves an associated time zone.

source

pub fn with_timezone<Tz2>(&self, tz: &Tz2) -> DateTime<Tz2>
where Tz2: TimeZone,

Changes the associated time zone. The returned DateTime references the same instant of time from the perspective of the provided time zone.

source

pub fn fixed_offset(&self) -> DateTime<FixedOffset>

Fix the offset from UTC to its current value, dropping the associated timezone information. This it useful for converting a generic DateTime<Tz: Timezone> to DateTime<FixedOffset>.

source

pub fn to_utc(&self) -> DateTime<Utc>

Turn this DateTime into a DateTime<Utc>, dropping the offset and associated timezone information.

source

pub fn naive_utc(&self) -> NaiveDateTime

Returns a view to the naive UTC datetime.

source

pub fn naive_local(&self) -> NaiveDateTime

Returns a view to the naive local datetime.

§Panics

DateTime internally stores the date and time in UTC with a NaiveDateTime. This method will panic if the offset from UTC would push the local datetime outside of the representable range of a NaiveDateTime.

source

pub fn years_since(&self, base: DateTime<Tz>) -> Option<u32>

Retrieve the elapsed years from now to the given DateTime.

§Errors

Returns None if base < self.

source

pub fn to_rfc2822(&self) -> String

Returns an RFC 2822 date and time string such as Tue, 1 Jul 2003 10:52:37 +0200.

§Panics

Panics if the date can not be represented in this format: the year may not be negative and can not have more than 4 digits.

source

pub fn to_rfc3339(&self) -> String

Returns an RFC 3339 and ISO 8601 date and time string such as 1996-12-19T16:39:57-08:00.

source

pub fn to_rfc3339_opts(&self, secform: SecondsFormat, use_z: bool) -> String

Return an RFC 3339 and ISO 8601 date and time string with subseconds formatted as per SecondsFormat.

If use_z is true and the timezone is UTC (offset 0), uses Z as per Fixed::TimezoneOffsetColonZ. If use_z is false, uses Fixed::TimezoneOffsetColon

§Examples
let dt = NaiveDate::from_ymd_opt(2018, 1, 26)
    .unwrap()
    .and_hms_micro_opt(18, 30, 9, 453_829)
    .unwrap()
    .and_utc();
assert_eq!(dt.to_rfc3339_opts(SecondsFormat::Millis, false), "2018-01-26T18:30:09.453+00:00");
assert_eq!(dt.to_rfc3339_opts(SecondsFormat::Millis, true), "2018-01-26T18:30:09.453Z");
assert_eq!(dt.to_rfc3339_opts(SecondsFormat::Secs, true), "2018-01-26T18:30:09Z");

let pst = FixedOffset::east_opt(8 * 60 * 60).unwrap();
let dt = pst
    .from_local_datetime(
        &NaiveDate::from_ymd_opt(2018, 1, 26)
            .unwrap()
            .and_hms_micro_opt(10, 30, 9, 453_829)
            .unwrap(),
    )
    .unwrap();
assert_eq!(dt.to_rfc3339_opts(SecondsFormat::Secs, true), "2018-01-26T10:30:09+08:00");
source

pub fn with_time(&self, time: NaiveTime) -> LocalResult<DateTime<Tz>>

Set the time to a new fixed time on the existing date.

§Errors

Returns LocalResult::None if the datetime is at the edge of the representable range for a DateTime, and with_time would push the value in UTC out of range.

§Example
use chrono::{Local, NaiveTime};

let noon = NaiveTime::from_hms_opt(12, 0, 0).unwrap();
let today_noon = Local::now().with_time(noon);
let today_midnight = Local::now().with_time(NaiveTime::MIN);

assert_eq!(today_noon.single().unwrap().time(), noon);
assert_eq!(today_midnight.single().unwrap().time(), NaiveTime::MIN);
source

pub const MIN_UTC: DateTime<Utc> = _

source

pub const MAX_UTC: DateTime<Utc> = _

source

pub const UNIX_EPOCH: DateTime<Utc> = _

source

pub fn format_with_items<'a, I, B>(&self, items: I) -> DelayedFormat<I>
where I: Iterator<Item = B> + Clone, B: Borrow<Item<'a>>,

Formats the combined date and time with the specified formatting items.

source

pub fn format<'a>(&self, fmt: &'a str) -> DelayedFormat<StrftimeItems<'a>>

Formats the combined date and time per the specified format string.

See the crate::format::strftime module for the supported escape sequences.

§Example
use chrono::prelude::*;

let date_time: DateTime<Utc> = Utc.with_ymd_and_hms(2017, 04, 02, 12, 50, 32).unwrap();
let formatted = format!("{}", date_time.format("%d/%m/%Y %H:%M"));
assert_eq!(formatted, "02/04/2017 12:50");

Trait Implementations§

§

impl Clone for Timestamp

§

fn clone(&self) -> Timestamp

Returns a copy of the value. Read more
1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
§

impl Debug for Timestamp

§

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter. Read more
§

impl Deref for Timestamp

§

type Target = DateTime<Utc>

The resulting type after dereferencing.
§

fn deref(&self) -> &<Timestamp as Deref>::Target

Dereferences the value.
§

impl<'de> Deserialize<'de> for Timestamp

§

fn deserialize<__D>( __deserializer: __D, ) -> Result<Timestamp, <__D as Deserializer<'de>>::Error>
where __D: Deserializer<'de>,

Deserialize this value from the given Serde deserializer. Read more
§

impl From<DateTime<Utc>> for Timestamp

§

fn from(value: DateTime<Utc>) -> Timestamp

Converts to this type from the input type.
§

impl PartialEq for Timestamp

§

fn eq(&self, other: &Timestamp) -> bool

This method tests for self and other values to be equal, and is used by ==.
1.0.0 · source§

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
§

impl Serialize for Timestamp

§

fn serialize<__S>( &self, __serializer: __S, ) -> Result<<__S as Serializer>::Ok, <__S as Serializer>::Error>
where __S: Serializer,

Serialize this value into the given Serde serializer. Read more
§

impl Validator<Timestamp> for TimeNotAfter

§

type Error = TimeTooFarError

The associated error type returned by this validator.
§

fn validate( &self, value: &Timestamp, ) -> Result<(), <TimeNotAfter as Validator<Timestamp>>::Error>

Validate a claim value Read more
§

impl Validator<Timestamp> for TimeNotBefore

§

type Error = TimeTooFarError

The associated error type returned by this validator.
§

fn validate( &self, value: &Timestamp, ) -> Result<(), <TimeNotBefore as Validator<Timestamp>>::Error>

Validate a claim value Read more
§

impl Eq for Timestamp

§

impl StructuralPartialEq for Timestamp

Auto Trait Implementations§

Blanket Implementations§

source§

impl<T> Any for T
where T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T> Borrow<T> for T
where T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
source§

impl<T> CloneToUninit for T
where T: Clone,

source§

default unsafe fn clone_to_uninit(&self, dst: *mut T)

🔬This is a nightly-only experimental API. (clone_to_uninit)
Performs copy-assignment from self to dst. Read more
source§

impl<T> DynClone for T
where T: Clone,

source§

fn __clone_box(&self, _: Private) -> *mut ()

source§

impl<Q, K> Equivalent<K> for Q
where Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

source§

fn equivalent(&self, key: &K) -> bool

Checks if this value is equivalent to the given key. Read more
source§

impl<Q, K> Equivalent<K> for Q
where Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

source§

fn equivalent(&self, key: &K) -> bool

Compare self to key and return true if they are equal.
source§

impl<Q, K> Equivalent<K> for Q
where Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

source§

fn equivalent(&self, key: &K) -> bool

Compare self to key and return true if they are equal.
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

source§

impl<T> FutureExt for T

source§

fn with_context(self, otel_cx: Context) -> WithContext<Self>

Attaches the provided Context to this type, returning a WithContext wrapper. Read more
source§

fn with_current_context(self) -> WithContext<Self>

Attaches the current Context to this type, returning a WithContext wrapper. Read more
source§

impl<T> Instrument for T

source§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more
source§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
source§

impl<T, U> Into<U> for T
where U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<T> IntoEither for T

source§

fn into_either(self, into_left: bool) -> Either<Self, Self>

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
source§

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
source§

impl<T> Pointable for T

source§

const ALIGN: usize = _

The alignment of pointer.
§

type Init = T

The type for initializers.
source§

unsafe fn init(init: <T as Pointable>::Init) -> usize

Initializes a with the given initializer. Read more
source§

unsafe fn deref<'a>(ptr: usize) -> &'a T

Dereferences the given pointer. Read more
source§

unsafe fn deref_mut<'a>(ptr: usize) -> &'a mut T

Mutably dereferences the given pointer. Read more
source§

unsafe fn drop(ptr: usize)

Drops the object pointed to by the given pointer. Read more
source§

impl<T> PolicyExt for T
where T: ?Sized,

source§

fn and<P, B, E>(self, other: P) -> And<T, P>
where T: Policy<B, E>, P: Policy<B, E>,

Create a new Policy that returns Action::Follow only if self and other return Action::Follow. Read more
source§

fn or<P, B, E>(self, other: P) -> Or<T, P>
where T: Policy<B, E>, P: Policy<B, E>,

Create a new Policy that returns Action::Follow if either self or other returns Action::Follow. Read more
source§

impl<T> Same for T

§

type Output = T

Should always be Self
source§

impl<T> ToOwned for T
where T: Clone,

§

type Owned = T

The resulting type after obtaining ownership.
source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
source§

impl<V, T> VZip<V> for T
where V: MultiLane<T>,

source§

fn vzip(self) -> V

source§

impl<T> WithSubscriber for T

source§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more
source§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more
source§

impl<T> DeserializeOwned for T
where T: for<'de> Deserialize<'de>,